Internal repair clamp ROMACON Internal repair clamp

Romacon internal repair clamps are used for permanent repairs of broken and damaged pipes from the inside. For water, gas and petrochemical fluids

Application:
The Romacon internal repair clamp can be installed inside pipes of various materials. -20 inch / 500 mm. - or larger - and a safe operating pressure can be exercised up to 240 psi / 16 bar.

The special profile on the external side of the rubber gasket will ensure a complete sealing surface between the expansion sections and the pipeline to be repaired. All the metal components for this simplified internal sealing procedure are made of stainless steel 316L quality material and are fully passivated.

A very solid and functional expansion system takes care of the proper distribution of the forces on the rubber seal, so that a perfect sealing wil be created.

The problem:

Leakage of pipe joints in the stormwater and sewage watertransportation is a known - and costly fact! The consequences of water loss result in increased pumping & energy cost, including maintenance and lost revenues.

Sewage leakage will not only contaminate the surroundings but the waste is also not being transported for proper treatment.

During the installation of the stainless steel sections one only has to use a screwdriver and a ratchet wrench. In other words, no complicated and costly equipment or installation time is required. The Romacon internal repair clamp has a low amount of parts and is light weight which is an appreciated and welcome feature during installing expansion procedures.

By selecting an ultra-low profile internal construction system, the optimum water flow characteristics can be maintained.